| 1283 |
Formation of recycled plastics from depolymerized monomers
derived from waste fiber-reinforced plastics. (Kamimura, A., Konno,
E., Yamamoto, S., Watanabe, T., Yamada, K. & Tomonaga, F.) |
2009 |
Journal of Material Cycles and Waste Management, 11 (1) pp.
38-41. |
Link |
| 1257 |
A Study on a Practical Treatment System for the Wasted FRP
Vessels in Korea. (Lee, E. J., Jung, R. T., Kim, S. D. & Chun,
T. B.) |
2008 |
OCEANS 2008 - MTS/IEEE Kobe Techno-Ocean |
Link |
| 1271 |
Developing an Extracting Method of Laminated Glass-fiber from
FRP Boats. (Yoon, K. Y. & Kim, Y. S.) |
2008 |
OCEANS 2008 - MTS/IEEE Kobe Techno-Ocean |
Link |
| 1069 |
Decomissioning of end of life boats: A status report.
(IInternational Council of Marine Industry Associations) |
2007 |
ICOMIA |
pdf |
| 1184 |
Overview of Ship Recycling in the UK - Guidance notes.
(DEFRA) |
2007 |
DEFRA |
pdf |
| 1216 |
Research to Determine the Regulatory Approaches to Recreational
Vessels within the EU, Canada, Australia, New Zealand and the USA.
(Marico Marine Group) |
2007 |
MCA Research Project 586 |
pdf |
| 1322 |
Sustainable technologies for inland leisure craft. (Landamore,
M. J., Birmingham, R. W., Downie, M. J. & Wright, P. N.
H.) |
2007 |
Proceedings of the institution of Mechanical Engineers, Part M:
Journal of Engineering for the Maritime Environment, 221 (3) pp.
97-114 |
Link |
| 1129 |
Investigation of sustainable technologies for the design,
construction, operation and decommissioning of recreational craft.
(Birmingham R W, Landamore M J, Wright P N H and Downie M J) |
2006 |
|
pdf |
| 1136 |
Life Cycle and Cost-Benefit Analysis of Selected Technologies
for Sustainable Inland Boating. ( Landamore M J, Birmingham R
W, Downie M J, Mesbahi E, Jackson S.) |
2006 |
Norfolk and Suffolk Boatbuilders Association |
pdf |
| 1263 |
Assessment of the Environmental Impact on Resource Recycling of
Waste-FRP. (Takehiro, I. & Satoshi, S.) |
2006 |
Reinforced Plastics, 52 (10) pp 500-507. |
Link |
| 1285 |
FRP Recycling Method Using Sub-Critical Water Hydrolysis.
(Takaharu, N., Toyoyuk, U., Tetsuya, M., Masaru, H., Toshihiro, M.
& Kenji, O.) |
2006 |
MEW Technical Report, 54 (1) pp.23-29 |
Link |
| 1296 |
Environmental response required for FRP/FRTP: FRP
recycling technology using a normal pressure dissolution method.
(Katsuji, S.) |
2006 |
Engineering Materials, 54 (4) pp. 58-61 |
Link |
| 1297 |
FRP recycling having entered practical stage: Challenges to
waste FRP resource recycling business. (Yoshiro, S.) |
2006 |
Engineering Materials, 54 (4) pp. 62-67 |
Link |
| 1313 |
Recycling technologies for thermoset composite
materials—current status. (S. J. Pickering) |
2006 |
Composites Part A: Applied Science and Manufacturing, 37 (8)
pp.1206-1215 |
Link |
| 1077 |
Ecoboats - boats for a sustainable future on the Norfolk and
Suffolk Broads. (Landamore M.J., Birmingham R.W., Downie M.J. and
Wright P.N.H.) |
2005 |
Norfolk and Suffolk Boatbuilders Association |
pdf |
| 1114 |
Guidance Notes on the UK Regulations: Recreational Craft.
(ANON) |
2005 |
Office of Public Sector Information |
pdf |
| 1115 |
Guide to Small Craft Design Codes. (Webster, BN and Birmingham,
RW) |
2005 |
University of Newcastle Upon Tyne |
pdf |
| 1209 |
Recrational Craft Guidance Notes on UK Regs. (Office of Public
Sector Information) |
2005 |
Standards and Technical Regulations Directorate (STRD) |
pdf |
| 1315 |
Recycling type FRP composite. (Goichi, B.Goichi, B.) |
2005 |
Science of Machine, 57 (5)
pp.544-550. |
Link |
| 1063 |
Construction Standards for Small Vessels. (Transport
Canada) |
2004 |
Transport Canada |
pdf |
| 1210 |
Recreational Draft Directive: boat builders guide.
(British Marine Federation) |
2004 |
British Marine Federation |
pdf |
| 1286 |
FRP Recycling using Depolymerization of Unsaturated Polyester.
(Katsuji, S.) |
2004 |
Materials System, 22, pp. 79-85 |
Link |
| 1289 |
Green Guide to Composites - An environmental profiling system
for composite materials and products. (Net Composites and Buildings
Research Establishment) |
2004 |
Net Composites and Buildings Research Establishment |
Link |
| 1314 |
Recycling Technology for Disused FRP Boats in Cement Burning
Process. (Shigeru, A., Shin'ya, H., Kazuyoshi, M., Ken'ichi, K.,
Akio, S., Kojiro, Y., Nobuhiko, Y. & Shuji, N.) |
2004 |
Papers of National Maritime Research Institute, 4 (4) pp. 418,
419-500. |
Link |
| 1288 |
Fundamental Study on FRP Recycling using Several Solvents.
(Yoshiki, S. & Yutaka, M.) |
2003 |
Tanso 208, 120-125 |
Link |
| 1316 |
Recycling waste FRP - From pure research to practical use.
(Shoji, Y.) |
2003 |
Journal of the Japan Society for Composite Materials. 29 (6)
pp. 210-216. |
Link |
| 1035 |
Boat Disposal. (Connecticut Department of Environmental
Protection) |
2002 |
Connecticut Department of Environmental Protection |
pdf |
| 1078 |
Eco-friendly boating: Low Wash Hulls and Electric Boats.
(Broads Authority) |
2001 |
Broads Authority |
pdf |
| 1105 |
Factsheet: What is ship breaking? (Occupational Saftey and
Health Administration (OSHA)) |
2001 |
OSHA; U.S. Department of Labor |
pdf |
| 1124 |
Industry code of practice on ship recycling. (Marisec) |
2001 |
Maritime International Secretariat Services Limited
(Marisec) |
pdf |
| 1062 |
Consideration of the preparation of the draft technical
guidelines on the environmentally sound management of dismantling
of ships. (United Nations Environment Programme (UNEP)) |
2000 |
UNEP |
pdf |
| 1130 |
Is there a decent way to break up ships? (Bailey, PJ) |
2000 |
International Labour Organization (ILO), Geneva |
pdf |
| 1256 |
A fluidised-bed process for the recovery of glass fibres from
scrap thermoset composites. (S. J. Pickering, R. M. Kelly, J. R.
Kennerley, C. D. Rudd and N. J. Fenwick) |
2000 |
Composites Science and Technology, 60 (4)
pp.509-523 |
Link |
| 1203 |
Profile of the Plastic Resin and Man-made Fibre Industry. (US
Environmental Protection Agency) |
1997 |
US EPA |
pdf |
| 1204 |
Profile of the shipbuilding and repair industry. (US
Environmental Protection Agency) |
1997 |
US EPA |
pdf |
| 1084 |
Emission Standards for New Gasoline Marine Engine. (US
Environmental Protection Agency) |
1996 |
US EPA |
pdf |
| 1029 |
Assessment of VOC Emissions from Fibreglass Boat Manufacturing.
(Stockton, MB and Kuo, IR) |
1990 |
USEPA |
pdf
|
| 1087 |
End of life boat hulls - the current situation and disposal
options. (Stevenson K) |
|
BSc Thesis, University of Southampton |
pdf |